2024 Mi-T-M Air Compressor / Generator / Welders AGW-SH22-20M

Information

2024 Mi-T-M Air Compressor / Generator / Welders AGW-SH22-20M

Two Stage Gasoline 20-Gallon - AGW-SH22-20M

AGW-SH22-20M

This AGW Series combines an air compressor, generator and welder into one machine, making it the complete on-site unit to efficiently tackle numerous jobs at once.

Compressor Pump

Cast iron compressor pump · Splash lubricated · Stainless-steel braided discharge hose · Large canister intake filter · Oil level sight indicator

Generator

Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder

Amperage selection switch, 170A or 220A maximum

Frame

Powder coated ASME receiver tank · Powder coated four-piece belt guard

Components

Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance · 16 1/2-inch fly wheel

Welder Mode

DC current only · Engine must be running full throttle · Selector switch must be set to full throttle

Photos

Highlights

  • San Mateo, California
  • 2024
  • Mi-T-M
  • Air Compressor / Generator / Welders AGW-SH22-20M
  • Honda GX690 OHV
  • Available
  • 24.00 in.
  • 50.00 in.

Specifications

  • 2024
  • Mi-T-M
  • Air Compressor / Generator / Welders
  • AGW-SH22-20M
  • General
  • Honda GX690 OHV
  • 688cc
  • Electric
  • 3600 RPM
  • Max. AC Output: 5000 watts | Rated AC Output: 4500 watts | Frequency/Voltage: 60Hz/120V/240V | Max. Amps (120V/240V): 41.5/20.8 | Cont. Amps (120V/240V): 37.5/18.8 | Duty Cycle (10 Min. Run Time): 220A @ 40%, 190A @ 60%, 150A @ 100% | DC Voltage: 50-220A Working Range
  • Cont. On-Load @ 90 PSI / 175 PSI: 4500 watts / 4500 watts
  • CFM @ 90 PSI: 30.5 | CFM @ 175 PSI: 29.0
  • 47.00 in.
  • 24.00 in.
  • 50.00 in.
  • Tank Size: 20-gallon | Fuel Tank: 10-gallon
  • Net: 803.00 lbs.
  • 870.00 lbs.